This article will outline seven points that, if kept in mind during the design process, can eliminate many roofing-related change orders and reduce installation time and costs.
This detail is intended to be used where wall heights are greater than 24" above roof surface. The profile of specific components, their configuration or sequencing, can vary with the roof system, climatic differences, and regional or area practices.
Continuous cleats are recommended when flashing face dimension exceeds 3 inches and in areas deemed a high-wind zone as categorized by local building code.
Continuous cleats are recommended when flashing face dimension exceeds 3 inches and in areas deemed high-wind zone as categorized by local building code.
The profile of specific components, their configuration or sequencing, can vary with the roof system, climatic differences, and regional or area practices
“Commercial Roofing Boot Camp” — a 10-week, advanced design course online for 50 professionals taught by Dr. Jim Hoff — has been approved by RCI for 20 RCI CEHs and 20 AIA Learning Units.