The installation of liquid-applied roofing shall comply with the provisions of this section.

This section implies that all wall and floor joints must be properly waterproofed.

This code implies that all roof materials that pass the testing provided in the ASTM E 108 fire testing under the light category are identified as Class C roof assemblies.

This section implies that the wall substrate must be properly prepared to receive waterproofing materials.

Roof replacements shall comply with Section C402.1.3, C402.1.4, C402.1.5 or C407 where the existing roof assembly is part of the building thermal envelope and contains insulation entirely above the roof deck.

This code implies that all roof materials that pass the testing provided in the ASTM E 108 fire testing under the moderate category are identified as Class B roof assemblies

This section implies that all walls that require waterproofing shall be constructed of concrete or masonry and shall be of structural integrity to withstand hydrostatic pressure and lateral loads.

This code implies that ice and water shield—eaves flashing—is required for installation on all heated, steep-slope structures in colder climates.

Floors required to be waterproofed shall be of concrete and designed and constructed to withstand the hydrostatic pressures to which the floors will be subjected

Liquid-applied roofing shall comply with ASTM C 836, ASTM C 957, ASTM D 1227 or ASTM D 3468, ASTM D 6083, ASTM D 6694 or ASTM D 6947.